PERTH RETICULATION   Mon–Fri, 8am–5pmAlready a customer?   Request a service
WA Retic Guys

Reticulation repairs & alterations · Perth Retic playing up?
Let’s get it sorted.

Leaks, dry patches or a station that won’t stop? We find faults and adapt reticulation to suit changes in your garden.

5.092 Google reviews
A pop-up sprinkler watering lawn beside a flowering garden
Diagram of a reticulation system: a controller and its wiring, the water supply, a valve box with three station valves, two lawn stations on pop-up sprinklers and a garden bed on dripline.St 1St 2St 3SprinklersSupplyValvesWiringAUTOController
Gloved hands working on a sprinkler at the edge of a garden bed
Repairs that make sense

Find the cause.
Work out the fix.

, or can have several causes. We check the controller, wiring, valves and sprinklers to work out the repair.

Tell us which stations are affected. A photo of the controller or problem area helps us understand the fault.

Get help with a controller
Plan of an existing lawn system with three marked changes: A, dripline extended into a new garden bed; B, sprinklers adjusted around new paving; C, a damaged sprinkler replaced.ABC
A spade lifting soil during garden work
Room for a change

Renovating?
Let’s rethink the retic.

Moving garden beds, extending a patio or changing your lawn can all affect sprinkler coverage. We can assess alterations and extensions to your existing system.

  • Extend watering to new garden beds
  • Adjust sprinklers around new paving or lawn
  • Replace damaged or unsuitable components
What we repair

Common reticulation faults.
Found and fixed.

Most repair calls start with one of these. Tell us which sounds like yours and which stations it affects.

The system won’t start

No stations run, or the controller looks dead. The cause is often the controller, its power supply, a wiring fault or the water being switched off. We test each in turn.

One station won’t come on

The rest of the system runs. That usually points to the station’s solenoid valve or the wire running to it. We test at the controller and at the valve.

A station won’t switch off

Water keeps running or weeping after the cycle ends. Grit under the valve’s diaphragm or a worn valve is the usual cause. We clean or replace the solenoid valve.

Leaks and soggy patches

Water pooling, bubbling up or running across the verge. Cracked pipe, a split fitting or a damaged sprinkler are common. We dig to the leak and repair it.

Sprinklers barely pop up

Low pressure on one station can mean a leak on that line, a blocked nozzle or a valve not opening fully. On a bore, the pump may be the cause, which our sister company Allwest looks after.

Dry or brown patches

Coverage changes as nozzles block, sprinklers sink or tilt, and plants grow. We clean, raise, straighten or replace sprinklers, and move or add them where needed.

Broken sprinklers and risers

Mowers, cars and foot traffic take their toll. We replace broken pop-ups, risers and nozzles and set them at the right height.

Controller trouble

A blank screen, a lost program or stations running at odd times. We check the controller, wiring and valves before recommending a replacement.

Parts we commonly replace

  • Solenoid valves and coils
  • Pop-up sprinklers and rotors
  • Nozzles
  • Risers
  • PVC pipe and fittings
  • Drip line
  • Controllers
  • Station wiring

Reticulation repairs across Perth

We take repair bookings across the Perth metropolitan area, including Applecross, Ardross, Attadale, Beeliar, Bull Creek, Canning Vale, City Beach, East Fremantle, Hammond Park, Kardinya, Kensington, Kenwick, North Perth, Palmyra, South Fremantle, Spearwood and Willagee. Somewhere else? Send your suburb and we’ll confirm.

Check your service area
How repair charges work

Callout.
Labour. Parts.

The total depends on the fault, time on site and replacement parts. Ask for our current callout and labour rates when arranging your repair.

Request a repair
“I wish I called you sooner! Brilliant service, great business!”
Megan, Attadale · Customer feedback

Tell us what’s happening.

Include your suburb, which stations are affected and what happens when you run the system. Photos of the controller or affected area can help us understand the job.

Good to know

A few helpful answers.

A little clarity before you get in touch.

Have another question?
Is the work covered by a warranty?

Our workmanship is covered for 12 months. We can explain how the warranty applies to your repair.

What if the problem is with my bore pump?

Bore pump repairs and servicing are handled through our sister company, Allwest Bores and Reticulation. Let us know if your system runs from a bore.

Let’s take a look at your retic.

Tell us what’s happening, which stations are affected and your suburb.

Call the teamRequest a service